T6713 CO2 Sensor Module

Method	Non Dispersive Infrared (NDIR), gold plated optics, diffusion sampling (with Telaire’s Patented ABC Logic Self Calibrated Algorithm)
Measurement Range	0 to 5000 ppm
Dimensions	1.18 in X 0.787 in X 0.34 in (30 mm X 15.6 mm X 8.6 mm)
Accuracy*	400-5000 ppm ± 30 ppm + 3% of reading
Temperature Dependence	5 ppm per °C or 0.5% of the reading per °C,whichever is greater
Stability	< 2% of FS over life of sensor (15 years typical)
Pressure Dependence	0.13% of reading per mm Hg
Calibration Interval	Not required
Response Time	< 3 minutes for 90% step change typical
Signal Update	Every 5 seconds
Warm Up Time	< 2 minutes (operational) 10 minutes (maximum accuracy)
Operating Conditions	14°F to 140°F (-10°C to 60°C) 0 to 95% RH, non-condensing
Storage Conditions	-22°F to 158°F (-30°C to 70°C)
Tolerance based on span gas of ±2%, which adds to the uncertainty, tested at Standard Ambient Temperature and Pressure (SATP). Subjecting sensors to environments less than 400 ppm for more than 15 minutes may affect accuracy due to ABC Logic algorithm. Please call for detailed product specifications. Based on nominal 5VDC input voltage. For best performance, DC supply should be a regulated, low noise power source. The module may exhibit a tolerance addition of ±60ppm when first installed.

Telaire T6713 Series