T6613 CO2 Sensor Module

The Telaire T6613 is a small, compact CO₂ Sensor Module designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEMs). The module is ideal for customers who are familiar with the design, integration, and handling of electronic components.

All units are factory calibrated to measure Carbon Dioxide (CO₂) concentration levels up to 2000 and 5000 ppm. For higher concentrations, Telaire dual channel sensors are available.

Telaire offers high-volume manufacturing capabilities, a global sales force, and additional engineering resources to support your sensing application needs.

An affordable gas sensing solution for OEMs
Small, compact in size
Designed to integrate into existing controls and equipment
All units are factory-calibrated
A reliable sensor design based on 15 years of engineering and manufacturing expertise
Flexible CO₂ sensor platform designed to interact with other microprocessor devices
Eliminates the need for calibration in most applications with Telaire’s patented ABC Logic™ software
Lifetime calibration warranty

Method	Non Dispersive Infrared (NDIR), gold-plated optics, diffusion or flow through sampling (with Telaire’s patented ABC Logic Self Calibrated Algorithm)
Measurement Range	0 to 2000 ppm**
Dimensions	2.25 in X 1.365 in X 0.60 in (57.15 mm X 34.67 mm X 15.24 mm)
Accuracy*	400-1250 ppm ± 30 ppm or 3% of reading, whichever is greater 1250-2000 ppm ± 5% of reading + 30ppm
Temperature Dependence	0.2% FS per °C
Stability	< 2% of FS over life of sensor (15 years typical)
Pressure Dependence	0.13% of reading per mm Hg
Calibration Interval	Not required
Response Time	< 2 minutes for 90% step change typical
Signal Update	Every 4 seconds
Warm Up Time	< 2 minutes (operational) 10 minutes (maximum accuracy)
Operating Conditions	32°F to 122°F (0°C to 50°C) 0 to 95% RH, non-condensing
Storage Conditions	-40°F to 158°F (-40°C to 70°C)

Output:
Digital	UART @ 19200 Baud I²C slave up to 100kHz Please call for detailed product specifications.
Analog	0 to 4 VDC
Power Supply Requirements	5 VDC regulated (±5%)
Power Consumption	0.90 watts peak 0.165 watts average
Interface Connections	Designed for 12 pin male header with 0.1 in (2.54 mm) spacing. Header not included.
Flow Rates (Via Flow Ports)	Flow through version 40 to 50 cc/min
Warranty Terms	12 months
* Tolerance based on span gas of ±2%. ** Subjecting sensors to environments less than 400 ppm for more than 15 minutes may affect accuracy due to ABC Logic algorithm.

Products Menu

Telaire T6613

CO₂ Sensor Module

Markets Menu

PRODUCTS

MARKETS

COMPANY